Skid-mounted Nitrogen/ CO2/ Argon/ Oxygen Gas Supply System
No. |
Item Name |
Specification |
QTY (PCS) |
I |
Manual start & automatic stop cryogenic liquid pump skid (2 sets - one work + one spare) |
||
1 |
Cryogenic liquid pump (single cylinder) |
Model No.: BPO-1800/60 Capacity: 1800L/h Medium: liquid nitrogen Min. inlet pressure: 0.1Mpa Max. inlet pressure: 1.6Mpa Operating pressure: 60 bar Design pressure: 60 bar Inverter motor: 11KW |
2 |
2 |
High pressure check valve |
|
2 |
3 |
High pressure damper |
(Liquid buffer device - protects pipeline from high pressure shock) |
2 |
4 |
Cryogenic valves |
Stop valve, check valve, safety valve pressure gauge |
1 |
5 |
Integrated skid (pump skid) |
(with rain shelter) |
1 |
6 |
Lifting ring |
Skid mounted with lifting port |
1 |
7 |
Explosion-proof junction box |
|
1 |
8 |
304 stainless steel piping in skid |
Base/frame/strengthening plate/trunnion, etc. |
1 |
9 |
Skid threading pipe |
|
|
II |
Ambient vaporizers (2 sets - one work + one spare) |
|
|
1 |
Ambient vaporizer |
Model No.: VQ-1000/60 Gasification volume: 1000L/h Operating pressure: 60 bar Design pressure: 66 bar |
2 |
2 |
Integrated skid mounted |
Frame, valves, instrument, etc. |
1 |
3 |
Stainless Steel Piping |
Valves, safety valves, small and large heads, other fasteners, etc. |
1 |
4 |
Heat conduction oil type heater |
Model No.: TLVSN2-1000/60 Medium: Nitrogen Gasification volume: 1000NM3/H Operating pressure: 60 bar Design pressure: 66 bar Outlet temperature: +5 ~ +10℃ Power: 21KW |
1 |
III |
Inverter control system/ Electrical intellegent safety system |
|
|
1 |
Pump skid inverter control system (The control cabinet is placed in the control room). Control system configuration is as stated. |
The control system adopts frequency conversion to control the cryogenic liquid pump skid; among them, two sets of 11KW frequency converters are used for precise control on the speed of the pump, so as to adjust the capacity. The pump will stop once it reaches the set pressure. |
1 |
IV |
Liquid test run |
|
1 |